You are here: Home Trailers Pintle Hitch Flatbed Tandem Dual Wheel ** P29320PFA-102

STATS & FACTS

P29320PFA-102

Main Frame: 14" x 30# I-Beam, high strength structural steel
Frame Bedside: 8" x 11.5# Channel, high strength structural steel
Bed Crossmembers: 4" x 3.2# Jr. I-Beam, high strength structural steel pierced through main frame I-Beam
Tongue: Formed part of main frame with chain box in tongue
Axles:

3 - 22,500# Dual Wheel Axle; 5" O.D. Beam, .50 wall
Brakes: 12 1/4" x 7 1/2" Air Brakes on all wheels; ABS on front & rear axle; spring brake on all axles
Suspension:

Hutch Series Slipper Spring with equalizer, 3 leaf spring;

3" wide per axle per side, 11,200# per side per axle
Tires: 12 -215/75R x 17.5 "H"   4,540# each @ 125 PSI
Wheels: 12 - 6.75 x 17.5 Dual Wheel, 221mm pilot, 8 on 275mm bolt circle, 5,400# each
Decking: 2" Nominal Oak Deck Bolted
Deck Dimensions: 29' Long (24' Flat & 5' Beavertail) x 8' 6" (102" O.A.W.)
Deck Height: 35"
Load Angle: 9 degrees
Coupler: 3" Adjustable Height Pintle Eye
Landing Jack: 25,000# Binkley Two speed drop leg
Ramps: 2 - Heavy Duty - 19 3/4" Wide x 66" Long
Wiring: Sealed modular wiring
Lights: All D.O.T. required; sealed and shock mounted LED lights
Extras: Anti-sail mud flaps, 3/4" x 36" Grade 70 safety chains with slip hook and safety latches
G.V.W.R.: 60,000#
Capacity: 49,400#

* This Trailer is Subject to 12% Federal Excise Tax.

STANDARD EQUIPMENT

  • 8' 6" Wide Deck
  • 2- 5' Spring Assist Ramps
  • 3 Position Adjustable Height 3" Pintle Eye HItch
  • 2" Nominal Oak Deck
  • 12,000# Drop Leg Landing Jack
  • 6- Tie Down Rings ("D" Rings) 3 per side
  • Safety Chains with Snap Hooks
  • Sealed and Shock Mounted LED Lights
  • Oil Bath Hubs
  • Sealed Modular Wiring System
  • Safety Breakaway System with Battery
  • Chain Box in Tongue
  • Mud Flaps

OPTIONAL EQUIPMENT

Click here for the optional equipment page!

REDI HAUL TRAILERS, INC., reserves the right to make changes at any time in price, specifications, etc., without prior notice and without obligation to make these changes on previously manufactured trailers.